Steps to connect your Ingenico Link 2500 for Wi-Fi

  1. Hold down the green button to boot the reader

  2. Once the card reader boots and lands on "This Lane Closed", key in 0-0-0-1

  3. Select Communication Type>Wifi.

  4. Press the yellow button to go back a menu

  5. Select WiFi Parameters>Scan Networks

  6. Select and authenticate with your desired SSID

  7. Return to the previous menu and select My Networks. Ensure your desired network says "Connected"

  8. Press the yellow button to go back a menu. Keep returning through menus until you are given the prompt to save and restart.

  9. After the card reader reboots, press 0-0-0-0 to confirm the current IP address.